• Double-flow design manages highest volume flow with no increase in casing size; matching typical driver speeds
  • Continually updated stage technology ensures optimal performance in any medium or low-pressure applications
  • Maintenance-friendly horizontally split design provides access to rotating element in any train configuration

  • Customized configuration available: in-line, back-to-back, intermediate cooling, additional side stream
  • 高达86英寸的法兰可以承受高达20个NEMA;72英寸直径的叶轮具有完整的铣削和机器人焊接
  • Complete accordance with API requirements with no gasket in middle section

  • Petrochemicals, fertilizers, refinery
  • LNG
  • Air separation



Ourhorizontally split MCL compressorhas a long history of excellence, primarily in the LNG market. Thanks to its configuration in full API compliance, it can easily manage the highest flow rate—ensuring high availability with any driver, and easy maintenance during operation.

Up to 60 bar
Inlet flow range
Up to 600,000 m3/h
Max number of phases
高达20,000 rpm
In line, back-to-back, double flow

co2compression capabilities

亚博竞彩App贝克休斯has an extensive portfolio evolved from proven products and more than 50 years of experience in CO2compression. Our equipment is operating in more than 90 plants, and we have new developments to maximize performance for carbon-capture applications. The typical train arrangement includes a steam turbine or electric motor driving a high-speed barrel compressor through an increasing gearbox or a pump for CO2compression applications. We can also provide a plug-and-pay solution fully integrated with a multistage pump.

Besides our traditional product portfolio, we have equipment operating at the world's largest CO2压缩站,每年可以重新注射超过300万吨的CO2来自澳大利亚液化天然气植物。近年来,我们的功率密度方法减少了足迹和重量,同时提高了效率和旋转速度的提高。借助新材料和涂层,可改善对腐蚀和应力腐蚀开裂的耐药性,我们可以管理任何酸或酸性气体混合物。

Integrated electrically driven package

Our proven compressor technology can be easily integrated to most electric motors in the market. Not only does the electric motor minimize emissions and comply with new regulations, but it's also an efficient choice that's simple to operate, with longer maintenance intervals and significantly lower total cost of ownership. Our in-house services include full system test validation with unique performance testing capabilities for large motor drives up to 100 MW.

We recently developed a fully electric LNG plant with nine 75-MW electric motors guaranteeing the costumer approximately 14 MTPA with a record availability of 99.8%. Focusing on optimized plant availability, we developed, validated, and patented an advanced torsional vibration control system (TVCS) that can avoid machine trip, minimize commissioning and start-up time, and give real-time insight on torsional phenomena. We can provide integrated monitoring and diagnostic architecture to enable around-the-clock, real-time monitoring, advisory and troubleshooting support through our iCenters. We also offer consolidated expertise on grid stability and load-flow analysis for expansion of power systems, and to help optimize existing systems.


Extreme operating conditions make an integrated bearing plus rotor design more and more necessary. We have therefore developed our own line of bearings with optimal oil consumption in high-speed and high-load conditions (up to 120 m/s, 4.0 MPa) drawing on our Lufkin-RMT Ultra technology for journal and thrust bearings. We're investing in testing facilities, partnerships with universities, and using advanced 3D numerical models to validate our bearings performance and predictability. Our in-house manufacturing technologies have the capacity to produce thousands of bearings per year—including tilting pad and fixed geometry journal bearings, thrust bearings, and combined journal-thrust bearings—ensuring a reliable single source for all orders and after-market service needs.

BCLMCL Bearing 1

BCLMCL Bearing 2

Get in touch with an expert.

Your request has been submitted.